How-To Guide On Fixing A Leaking Tap Or Faucet Step-By-Step

Fixing a leaking tap or faucet can be a lot easier and quicker if you know what you’re doing.  A leaking tap can be more than just an annoying sound. It is one of the severe plumbing issues that need an immediate fix. Because a leaking tap does not only waste water but can also be an indication of more significant plumbing issues.

So, fixing a dripping faucet or tap is a potentially costly problem. Fortunately, it’s not difficult to diagnose and repair the underlying issue. You can quickly and easily fix a dripping tap or faucet with the right tools and know-how. 

In this guide, we’ll cover the common causes of a dripping tap and how to fix them, from a faulty washer to a leaking cartridge.

Simple steps on how to fix a leaking tap or faucet

Repairing a leaky faucet or tap can be a common task. You can quickly fix the leaking faucet or tap with the right tools and techniques. You can effectively stop the leak and save time, money, and frustration. Hence, it is easy to fix a leaking tap or faucet.

Before you even start working on a leaking tap, turn off the water supply to avoid any accidents while fixing the tap. Also, it is vital to gather all the essential items and tools to begin the proper repair process. The correct technique is also necessary to repair dripping taps.

Follow these step-by-step guides to fix the leaking taps or showers and save a good amount of water. If you follow every instruction correctly, it might take up to some minutes, and you will not need help from any plumber.

Step-by-step guide to fixing a leaking tap or faucet:

1. Use a spanner or Allen key to remove the cover and handle of the tap. By doing so, you will identify the source of the leak. 

2. You must then loosen the screw and, if applicable, remove the handle. For the taps having a metallic cover, you can either unscrew them by hand or use a powered wrench to get them out of their recess.

3. Detach the tap bonnet, and remove the headgear. Examine the internal parts of the tap, including the body washer, O-ring, and jumper valve. Mostly, the jumper valve is a common source of leaks in taps. Remove it to inspect it for damage etc.

4. By replacing the body washer, jumper valve, and O-ring, you are often at the right spot in fixing the leaky tap. Further, you can use a lubricant on the spindle and valve to ensure proper sealing and smooth operation. However, a suitable lubricant compatible with the tapping material is also essential. 

5. Carefully tighten the nuts on the spindle and bonnet using the spanner. However, be careful not to tighten them over, as doing so can damage the tap components. Also, it will become difficult to remove in the future too. So, make sure you tighten them to get a secure seal.

6. Finally, you can reassemble the tap. Make sure to refit the bonnet and spindle.

7. Make sure there are no leaks by turning on the water supply again.

8. Reseating (if necessary): If the tap is still leaking, you may need to reseat the tap, which means resurfacing the tap body so the washer can achieve the tightest seal. You’ll need to buy a reseating kit for this.

How to fix a leaking shower tap or faucet

Note: Tools needed for a home plumbing first-aid kit include a universal tap spanner, small flat-head screwdriver, adjustable wrench, tap reseater, lubricant, and plumbing tape.

1. Shut off the water supply at the garden variety tap outside the home with a metre attached.

2. To avoid unpleasant surprises, take preventive measures, such as covering the shower drain before beginning.

3. Unscrew the shower tap’s cap and lid to gain access.

4. Use a multi-tap spanner or shift lever to remove the tap assembly’s cap and the component.

5. Visually inspect and replace the red body washer at the base of the tap bonnet, and replace the O-ring near the tap spindle if necessary. Lubricate the area with oil before reattaching.

6. It is vital to replace the tap valve if you notice any leaks in the wall seat. 

7. To fix a recurring leak in the shower, use a reseater tool to grind away the tap seat.

8. Reassemble and tighten assembly, put flange and handle back, turn mains on, and test shower.

Preventive Maintenance Tips for Taps and Faucets

1. It is essential to regularly check the taps and shower heads for signs of wear and tear. 

2. You must replace washers or O-rings when they show signs of degradation to prevent leaks.

3. Ensure the proper installation of taps and showerheads to prevent seepage around the base. 

4. Make sure you turn off the water supply valves. Also, drain the taps and shower heads regularly to avoid corrosion and mineral buildup that cause leaks over time. 

5. Be mindful of how tightly you grip taps and shower heads; excessive force can harm the internal components and lead to leaks.

6. It is great to rely on water-saving aerators in taps. They are best at hampering the water flow and preventing leaks because of elevated pressure. 

7. Make sure to clean mineral deposits from shower heads regularly. It helps maintain proper water flow and prevents clogs that lead to leaks. 

So, you can follow these simple preventive maintenance steps to extend the life of taps and shower heads. Likewise, it will also help you to prevent costly repairs in the future. 

Conclusion

So, fixing a leaky tap can be a manageable task! You only need a screwdriver, a plumber’s grease, and patience.

You can quickly fix a dripping faucet with simple steps and have it working again! Likewise, the dripping sound will no longer keep you up at night. So, it is easy to unscrew the faucet handle and turn off the water supply to remove it. 

Likewise, you can turn the faucet back on and check to ensure the dripping has stopped. Also, you may remove the tap valve and replace the valve with a new one. Remember to apply some plumber’s grease before installing the new valve.

But, if you still cannot fix it, you can contact your local plumber in Melbourne to do the job. We’re always nearby working in areas like Hawthorn, Kew, and Camberwell. Pick up the phone and reach Zebra Plumbing. We will be more than happy to assist. 

Share this post

Facebook
LinkedIn
Related Posts